Short Answer
Complete Explanation
The ERL message displayed on a Pit Boss pellet grill is an error code that alerts the user to a problem affecting the grill’s heating system. While the exact wording can vary between model years, the code is most frequently interpreted as “Error – Relay,” indicating a fault in the electronic relay that controls the igniter or the heating element. When the relay does not close properly, the grill may fail to ignite, lose temperature, or shut down unexpectedly. Users are advised to follow the manufacturer’s reset procedure and, if the problem persists, contact Pit Boss support for further diagnosis.
- Meaning of ERL:
Generally stands for “Error – Relay,” signalling a malfunction in the grill’s ignition relay or related circuitry. - Typical causes:
Loose wiring, a failed relay component, a dirty or obstructed igniter, or a temperature‑sensor fault that triggers the relay protection. - Recommended actions:
Power‑cycle the grill (turn off, unplug for at least five minutes, then restart), check and clean the igniter, verify that all wiring connections are secure, and consult the owner’s manual for a detailed reset sequence. If the error persists, professional service or warranty service may be required.
Common Misconceptions
ERL means the grill is out of pellets.
ERL does not indicate pellet level; it relates to an electrical relay or sensor issue. Pellet depletion is shown by a different indicator.
The error can be fixed by simply adding more pellets.
Adding pellets will not resolve an ERL code because the underlying cause is electrical, not fuel‑related.
FAQ
What should I do if my Pit Boss displays ERL?
First, power‑cycle the grill by turning it off and unplugging it for at least five minutes. After reconnecting power, attempt to restart the grill. If the code reappears, inspect the igniter and wiring for debris or loose connections, then follow the detailed reset steps in the owner’s manual. Persistent errors should be addressed by contacting Pit Boss customer service.
Can low pellet levels cause the ERL error?
No. ERL is an electrical error related to the relay or sensor system. Low pellet levels are indicated by a separate warning and do not trigger the ERL code.
Is the ERL error covered under the Pit Boss warranty?
If the grill is still within the manufacturer's warranty period and the error is not due to user misuse or external damage, the repair or replacement of the faulty relay component is typically covered. Verify warranty terms in the documentation or contact Pit Boss support.
Leave a Reply